Micro Polishing Compound Finish Kare
# 440-5 is a micro abrasive compound formulated for quick cutting power without scouring or tearing up the clear coat, leaving an exceptional high gloss finish.
For removal of heavy oxidation, scratches and imperfections caused by fallout or other surface impediments.
It is excellent for Body Shop use.
Removes sanding marks 1000 grit or finer.
DIRECTIONS: Shake well. Do not apply in direct sunlight or ectremely hot surfaces. Using a wool cutting pad, set buffer at 1800-2000 rpm. Apply enough product to create a buffing film that will act as a lubricant between the pad and the painted surface. DO NOT DRY BUFF. Begin buffing using a medium pressure at first them lighten up, overlapping and spreading product evenly over a controlled section.
NOTE: For best results, maintain a wet buffing film, avoid dry buffing and tilting pad on edge.